Two separate promises
The manufacturer warranty comes from the company that made the shingles, metal panels or other materials. It generally covers defects in those materials, under conditions the manufacturer sets. The workmanship warranty comes from your roofer and covers mistakes in how the roof was installed: a missed nail line, flashing done wrong, a leak at a transition.
Here is the trap. Installation errors cause a large share of roof problems, and a manufacturer's material warranty typically does not cover them. So a long material warranty can sit alongside a short or vague workmanship promise, and the short one is the one you are more likely to need. Many manufacturers also offer enhanced warranty tiers that add some labor or installation coverage, often only when the roofer holds a particular credential with that manufacturer and the roof is installed with specific components. Whether your roof qualifies is something to confirm in writing, not assume.
Warranty terms vary by manufacturer, product line and contractor, and they change. This page explains how warranties generally work. It does not describe or guarantee any specific warranty. Read the actual documents for your roof.
The four warranty questions
Ask these of every roofer you are considering, and get the answers in the contract or an attached document.
Sheet 05: Warranties
Ask four questions, get four written answers
Hover, focus or tap a cell below to see why each question matters.
Question 01
Who covers what?
Which parts of the roof does the manufacturer cover, which parts does the roofer cover, and for how long? Ask for both documents, not a summary.

Question 02
Who registers it?
Some manufacturer warranties must be registered after installation. Ask whether the roofer does it, by when, and how you receive confirmation.

Question 03
What voids it?
Ask for the list of exclusions: later rooftop work, missed maintenance, unapproved components. Knowing them now prevents an argument later.

Question 04
Does it transfer?
If you sell the house, can the next owner keep the coverage, and is there a deadline or fee? Buyers ask about this.

Manufacturer vs workmanship, side by side
| Question | Manufacturer warranty | Workmanship warranty |
|---|---|---|
| Who stands behind it | The material manufacturer | Your roofing contractor |
| What it is about | Defects in the products | Errors in installation |
| Where the terms live | The manufacturer's published warranty document | Your contract or the roofer's written warranty |
| Depends on | Correct installation, approved components, sometimes registration | The roofer still being in business and honoring it |
| Who you call first | Usually your roofer, who can tell whether it is a product or installation issue | Your roofer |
That last point is worth stressing. A workmanship warranty is only as good as the company behind it, which is one more reason the vetting steps matter. A roofer with a long local track record and a clear written warranty is often worth more than a longer promise from a company that may not be around to keep it.
What can void coverage
Exclusions differ, but these come up often enough that you should ask about each one specifically.
- Later rooftop work. A satellite dish, solar array or new vent installed by someone else can create a leak point that neither warranty covers. Ask your roofer before anyone else puts a hole in the roof.
- Mixed components. Some enhanced manufacturer warranties require that certain underlayments, starter strips or ridge caps come from the same maker.
- Neglect. Clogged gutters that back water under the edge, or branches left rubbing the surface, can be treated as maintenance failures.
- Missed registration. If registration is required and nobody does it, the coverage may default to a shorter basic term.
- Severe weather. Hail and wind damage are often handled through homeowner's insurance rather than a warranty. Read both.
The maintenance guide covers the routine care that keeps you on the right side of most of these.
If you need to make a claim
- you see a leak or stain soon after the installcall the roofer first with photos and the date you noticed it
- the roofer says it is a material defectask them to help start the manufacturer claim and keep copies
- the roofer will not respondsend a dated letter or email citing your written warranty
- storm damage is involvedcontact your insurer and read the storm chaser guide first
Keep a single folder with the contract, the warranty documents, registration confirmation, lien waivers, inspection record and photos from install day. When a claim happens years later, that folder does most of the work. If your contract did not spell out warranty terms, revisit the contract checklist for your next project.
Quick answers
Does a manufacturer warranty cover leaks?
Usually only when the leak is caused by a defect in the materials. Leaks from installation mistakes generally fall under the roofer's workmanship warranty instead, unless you have an enhanced manufacturer warranty that says otherwise. Read your documents to be sure.
What happens to my workmanship warranty if the roofer closes?
In most cases it ends with the business, which is why the company's track record matters as much as the length of the promise. Some manufacturer programs back certain installation coverage, but only under their specific terms.
Do I need to register my warranty?
Some manufacturer warranties require registration within a set time after installation. Ask your roofer whether they register it and request the confirmation for your records.
Will hail damage be covered by my roof warranty?
Hail and wind are often treated as weather events handled through homeowner's insurance rather than warranty defects. Check both your warranty exclusions and your insurance policy.

